![Douglas Underdahl](/img/default-banner.jpg)
- 103
- 3 193 990
Douglas Underdahl
United States
Приєднався 31 гру 2006
Douglas Underdahl's channel - tech, entertainment, and more!
Galaxie Fix Part 3
Great welding channel:www.youtube.com/@weldingtipsandtricks
What is a popcorn weld? Is it even a weld? Here we continue the fix of the Galaxie 500. Disclaimer:
Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of LV Equipment LLC no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not LV Equipment LLC.
What is a popcorn weld? Is it even a weld? Here we continue the fix of the Galaxie 500. Disclaimer:
Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of LV Equipment LLC no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not LV Equipment LLC.
Переглядів: 204
Відео
Galaxie Fix Part 2
Переглядів 119Рік тому
Here I replace the side rails on the 1966 Ford Galaxie 500. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC ...
Galaxie 500 Fix
Переглядів 434Рік тому
We go long and longer at fixing up Brian's Galaxie 500. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC reco...
Hyundai Elantra Rear Brakes and Hubs
Переглядів 2,9 тис.2 роки тому
Here we replace the rear brakes, hubs, and dust shields on a Hyundai Elantra. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video....
Hyundai Elantra Front Control Arm Replacement
Переглядів 6 тис.2 роки тому
Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC recommends safe practices when working with power tools, aut...
Plasmargon CUT 50 Plasma Cutter
Переглядів 7 тис.2 роки тому
Here's a review of the CUT 50 plasma cutter by Plasmargon. Welding, metal working, DIY, metal cutting. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information...
BMW e38 Coolant Reservoir Replacement
Переглядів 1,6 тис.2 роки тому
Here we replace the coolant tank on a 2000 BMW 740I. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC recomme...
Table Saw Outfeed Rehab.
Переглядів 542 роки тому
Here I fix my table saw outfeed . . . . table. Woodworking, etc. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment...
Wrong for 35 years?
Переглядів 1082 роки тому
Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. LV Equipment LLC recommends safe practices when working with power tools, aut...
Delta Bandsaw Metal Cutting Auto Feed
Переглядів 5903 роки тому
Here I take our wood cutting Delta bandsaw, which has been converted to cut metal, and build an auto feed unit for it. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of...
Kenmore Dishwasher Rack Repair
Переглядів 1,7 тис.3 роки тому
Here we fix a Kenmore Dishwasher rack with some welding and Re Rack coating. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ...
Harbor Freight 8 inch Bench Grinder Review Redux
Переглядів 14 тис.4 роки тому
Here's a redux of our original video - it's two years later, how does this tool perform now? This is Harbor Freight product number 94327. We attach a wire wheel to the unit to de-burr some parts for our Ammo Can Rocket Stoves. Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this inf...
Ammo Can Rocket Stove: A Street Corn Named Desire
Переглядів 9414 роки тому
Here we use our Ammo Can Rocket Stove to cook an "off the cob" Mexican street corn. Get your stove here: www.ebay.com/itm/233449880724 Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. LV Equipment LLC assumes no liability for property damage or injury incurred as a ...
Necchi 535 FA Sewing Machine Belt Replacement
Переглядів 7 тис.4 роки тому
Here we replace the belts on our old sewing machine and get it to work again!! Here's where I got the smaller belt: www.ebay.com/itm/Sewing-Machine-Lug-Belt-9-7-8-250mm/221916947722?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 Disclaimer: Due to factors beyond the control of LV Equipment LLC, it cannot guarantee against unauthorized modifications of this information, or improper use o...
Honda Fit aka Jazz Spark Plug and Coil Replacement
Переглядів 10 тис.4 роки тому
Honda Fit aka Jazz Spark Plug and Coil Replacement
BMW Starter Replacement E38 7 series 740i
Переглядів 22 тис.5 років тому
BMW Starter Replacement E38 7 series 740i
Converting a Delta Wood Bandsaw to Metal
Переглядів 44 тис.5 років тому
Converting a Delta Wood Bandsaw to Metal
Ammo Can Rocket Stove Build Part 2 (plus barbecue)
Переглядів 11 тис.6 років тому
Ammo Can Rocket Stove Build Part 2 (plus barbecue)
Just buy a 2 speed craftsman 1-1/8 HP. I flip the belt to the slower speed and installed a metal blade. Works perfect! Have $150 invested.
website link 404 error :(
Very good ~ you did not say what it was doing before you replaced belts! Was the fly wheel not consistently moving, so not stitching ?
How well does the rerack hold up? Nice job taking the time to fix the steel properly.
THANK YOU!
So awesome that I can replace the large belt all by myself! Thanks for the great tutorial.
Thanks buddy. Your instruction on how to dismantle and access the grinder were spot on. Took me an hour to complete and saved me hundreds of dollars.
Thank you for this video! It works! We just fixed ours. 😊
Are you still building these? I still use mine often!
Forceps are a handheld, hinged instrument used for grasping and holding objects.
Excellent. Thanks very much
Thanks , I’m going to fix my machine now !!
Fantastic tutorial! I think I can do this although the bending and twisting to get in there looks a bit challenging. Thank you so much for illustrating the Kenmore dishwasher buzz fix!
Damn, this is very helpful:D Going to do this on my 740i. Thanks
What an excellent tutorial. If you weren’t a teacher, you may have missed your calling. Thank you so much. 🔥⚡️👍
Nice one so are there 4 ignition coils in total on the Honda jazz or 8 ?
Anyone know what error code e04 means? All-new machine
Code e04??
Old video but hey that beast looks like a great find, not much different fom my 1972 Toro 726, you can still buy some parts or Chinese equivalents for the carb etc, surprised about the wheel clutches, thing is the drive has no slippage, so working on dry pavement can cause damage, there are also a few plastic collars that slide the drivedwheel over to the driveplate There are a lot of bronze wear bushing, auger, impeller, wheels, that need grease and may need replacement ... Toro could restart production of this exact machine and it would become a commercial best seller...
I just saw that you made it from aluminum. Can you make one for me??? I can pay you through a postal money order, or Zelle digital payment. I live in NYC, if you can, tell me how much you it'll cost plus shipping. I relly need one, Sir🙏🙏
Hello Sir. 🙏 I have the Sprit XY-25 5 String Bass, and I'd like to know where I can buy the Strap contraption you have installed on you guitar? I really need it, can't play my bass, becau6 it's so off, and my left arm angle gives me much pain. Hope you can help me out Sir. I am subscribed to your channel. Love your channel content!!!🙏🙏🙏🤗🤗
Thank you, this gave me confirence to tackle such job on my own!
I came up with a similar answer except did 1.75" and 6.0" on both runs. This yields about 148fpm and allows you to use the old belt guard with one small modification. I did drop the motor lower in the case and blocked up the saw about 1.5" to give the belts a bit more contact.
Hemostats is what they are called
This video is great, I’m just about to tackle this job on the Wife’s Honda Jazz and I’m now confident I can do it on the driveway.
Wondering if we can get an update? How did it hold up?!
Great insight…. I’ve been planning to do the same
Really helpful ✊🏼
Mate thank you for your instructions you just saved my wife and I from buying a new dishwasher turns out a small piece of plastic had lodged itself in the rotor blade making a god awful cracking noise. Once I followed your instructions it’s humming away like a charm 🍺 cheers.
a use a barbecue gear reducer on my 1720 rpm to 50 rpm with a huge torque
We can’t find the backing plate on rock auto would you have the part number??
Thank you so much for your post. I followed every step, and cleaned some small soft stuff. I pulled the last housing straight up with a plier instead of screw driver. The big noise disappeared now. I really appreciated it
what is the purpose of the two clutches on the wheels? For turning?
Where did you get the belts?
Please construct a rack out of stainless steel.
Good idea!
Thank you for putting together such a clear, concise and realistic video on this. I'm facing the same job and have a question. 3 wires are removed form the Solenoid. Main Power is the larger cable, Ignition Switch Signal is the 8mm nut, but what is the 3rd one? A ground perhaps? What's going on with my E38 is the Switch terminal is only getting ~8 volts and not even producing a click. Relay output inside the E-box works fine, its output terminal has battery voltage when key is in Start. Pretty sure I need to clean up the connections at the solenoid, but I want to make sure all my ducks are in a row before I jump in. Ideally, I'd be removing the sub-harness and cleaning/rehabbing it on the bench. Perhaps you know a few things that might make this easier?
Needle-nosed forceps. Straight out of surgery 😂
It always rains when you don't want it to.
So how did you connect the air hose? Did you use a quick connect or jerry rig a hose adapter?
Wouldn't you clean all the bolt. And not just for the heck of it nice video
How many dumbasses does it take to change a rear caliper brakes and
Thank you so much. This worked like a charm! Great video.
Great video showing how to do this job! BUT, I would like to add a very important piece of information. Before torquing the bolts. Drop the vehicle down with tires on ramps at standard ride height, THEN torque the bolts. OR use a transmission jack to push the lower control arm to standard ride height and torque bolts. This will prevent the bushings from binding causing premature failure. Hope that helps another DIYer!
Well done, looks really good! Much better for the enviroment to fix things which sadly seems to be becoming a lost art!
we bought our house in 2017 and the dishwasher was already here, now fast forward to june 30 2023 loaded and started dishwasher and it starts making a buzzing sound as it starts up. wife looks at me, i look at her and hit cancel. try again nope. so start looking for repair videos. i found yours watched it and then at the end called my wife in to see if sound was the same, yep. i found two screws in there one in by the grinder and one on the bottom, plastic strip, and something else. i guess this is just a long way of saying THANK YOU, last time we had a service call for something it ran us $600. this just cost 26.00 for the shop vac wet filter. Thanks again.
Doug looks like the pillow block shaft has a slot all the way across it to secure the pulleys - Yes? No slot would not work?
Doug. Is there a reason that your cross bracing for your Pillow blocks etc. uses angle iron on the back and flat bar stock on the front? Just what you had laying around?
hi, thanks for a great video. I am also an Elantra owner. Is it okay to drive without the backing plate?
Did you figure this out?
@@EdFloableyeah. I have nothing problem now.
Thank you for your reply! Great Job. One last question. What keeps the shaft in place that is used for the pillow blocks?
Doug. Which pulley goes up top? 12" or 10" what size shaft should the pillow blocks be?